# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath   "unix/:-1"

EndSection

Section "Module"
        Load  "GLcore"
        Load  "dbe"
        Load  "extmod"
	Load "fbdevhw"
	Load "pex5"
	Load "dri"
        Load  "glx"
        Load  "pex5"
        Load  "record"
        Load  "xie"
        Load  "xtt"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc101"
	Option	"XkbLayout"	"us"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
	VendorName "SAM"
        ModelName    "Monitor Model"
	HorizSync 31.5-48.5
	VertRefresh 50-70

        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
        Modeline "1400x1050"  129   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 70Hz, 76.8 kHz hsync
        Modeline "1400x1050"  151   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 75Hz, 82.3 kHz hsync
        Modeline "1400x1050"  162   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 85Hz, 93.2 kHz hsync
        Modeline "1400x1050"  184   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
	# no known options
	Identifier   "Trident CyberBlade (generic)"
        Driver       "trident"
	VendorName "SAM"
        BoardName     "Trident CyberBlade (generic)"
        
        #BusID
EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "Trident CyberBlade (generic)"
        Monitor      "Monitor0"
	DefaultDepth	16

	Subsection "Display"
        	Depth       16
		Modes "1024x768"
	EndSubsection

EndSection

Section "DRI"
	Mode 0666
EndSection